Teknobond 950 Road Marking and Floor Paint
Construction Chemicals
Teknobond 950 Road Marking and Floor Paint
Product Description
It is a one-component, solvent-based road marking and floor coating paint based on acrylic resin.
Areas of Use
• Highways, main roads, and secondary urban roads,
• Airports and bridges,
• Residential areas and shopping centers,
• Paving stones, curbs, and similar urban fixtures,
• Applied over asphalt or concrete surfaces in all types of engineering structures.
Properties and Advantages
• One-component and easy to apply.
• Cold-applied.
• Fast curing.
• Fast curing even when applied in thick layers.
• High abrasion resistance.
• High UV resistance.
• Does not change color when applied to asphalt.
• Remains visible in dark conditions.
Application Details
Surface Quality: The surface must be sound, clean, and free from all loose particles and substances that may prevent adhesion. The pull-off strength must be at least 1.5 N/mm².
Surface Preparation: Any voids or defects on the concrete or asphalt surface must be repaired. Protrusions, deposits, or other irregularities that impair surface smoothness must be brought to the same level using mechanical methods. The paint must be thoroughly mixed before use. Apply in a single coat. If a second coat is required, wait at least 1 hour. TEKNOBOND 950 cures by exposure to air and requires no additional treatment.
Application Notes / Limitations
• The paint must never be discharged into sewage systems or water channels.
• After partial use, the container must be tightly closed.
• Do not apply during rain. Do not dilute the product with water. Newly applied material must be protected from rain and similar weather conditions until fully cured.
• Can be applied by brush, roller, or specialized line-marking machines.
• After application, the surface must be protected from adverse weather conditions such as direct sunlight, strong winds, high air temperatures (above +35°C), rain, and frost.
• Keep away from ignition sources and do not smoke, as the product is flammable.
• Since curing is completed shortly after application, cleaning can only be carried out using mechanical equipment. Hands should be washed with clean lukewarm water and soap.
• Immediately after application, before the material hardens, equipment should be cleaned with TEKNOTİNER.