Teknobond 950 Road Marking and Floor Paint
Construction Chemicals
Teknobond 950 Road Marking and Floor Paint
Product Description
Single component, acrylic resin based, solvent based road marking and floor coating paint.
Areas of Use
• Highways, main and intermediate city roads,
• Airports, bridges,
• Housing, Shopping malls,
• On urban furniture such as paving stones, curbs,
• Applied on asphalt or concrete in all kinds of engineering structures.
Features and Advantages
• Single component, easy to apply.
• Applied cold.
• Cures quickly.
• Cures quickly even in thick applications.
• High abrasion resistance.
• High UV resistance.
• Its color does not change on asphalt.
• It can also be seen in the dark.
Application Details
Surface Quality: The surface must be solid, clean, free from all kinds of loose particles and all kinds of substances that prevent adhesion. The tensile strength must be min. 1.5 N/mm2.
Surface Preparation: If there are gaps on the concrete or asphalt to be applied, they must be repaired.
Clumps, protrusions, etc. that disrupt the surface smoothness must be brought to the same level with mechanical methods.
The paint must be mixed thoroughly before use. Application is done in a single layer.
If a second layer is to be applied, it must be waited for at least 1 hour. TEKNOBOND 950 cures with air, no additional
process is required.
Application Notes / Limitations
• Paint should never be discharged into sewage and water channels.
• After partial use; the packaging should be tightly closed.
• It should not be applied in the rain. The product should not be diluted with water. Freshly applied material
should not be exposed to rain, etc. until it has completed its hardening. should be protected against weather conditions.
• Applied with brush, roller or special line machines.
• After application, it should be protected against adverse weather conditions such as direct sunlight, strong wind, high air temperature (over +35°C),
rain and frost.
• Keep away from ignition sources as it is flammable, do not smoke.
• Since the hardening will be completed shortly after the application, cleaning can only be done using mechanical equipment.
hands should be washed with clean warm water and soap.
• Immediately after the application, before the material hardens, the equipment should be washed with TEKNOTİNER.