Baumit Duofix Thermal Insulation Board Adhesive Mortar 25 Kg
Baumit Duofix Thermal Insulation Board Adhesive Mortar 25 Kg
Product Description
It is a cement-based, highly breathable, high adhesion
powerful thermal insulation board adhesive with polymer reinforcements. The product, which is resistant to water, moisture and impacts,
provides ease of application, and can also be applied by machine.
Areas of Use
It is used in bonding applications of EPS, rock wool, XPS etc. thermal insulation boards in all structures, interior or exterior facades. It is used on concrete, brick, aerated concrete and plastered facades.
Surface Preparation
The sub-surface must be clean, dry, dust-free, solid, not frozen, salt/lime effusion. There should be no loose parts on
the surface to be applied. If there are gaps or areas requiring
repair on the surface to be applied, they should be corrected before application.
Application
The material should be mixed with electric mixers for 3-4 minutes, rested for 5 minutes and
then mixed again and used. It is recommended to apply an adhesive in the form of a frame with an average width of 5 cm
around the plates and to apply at least 3 clusters to the inner part of the frame. With this type of bonding, the required minimum 40% bonding area
is created. During application, care should be taken to prevent the adhesive from spreading to the side surfaces of the plate and creating a thermal bridge.